diff options
author | André Fabian Silva Delgado <emulatorman@lavabit.com> | 2012-08-27 00:08:59 -0300 |
---|---|---|
committer | André Fabian Silva Delgado <emulatorman@lavabit.com> | 2012-08-27 00:08:59 -0300 |
commit | 4030033fc8102f13912a8262b940c0ede2d5e710 (patch) | |
tree | d978c04bfe1483835abc594176bb5667ddf670af /libre-testing/texlive-bin-libre | |
parent | 0e581659e6f376ff6d2cc524502ac54e02ebb93e (diff) | |
download | abslibre-4030033fc8102f13912a8262b940c0ede2d5e710.tar.gz abslibre-4030033fc8102f13912a8262b940c0ede2d5e710.tar.bz2 abslibre-4030033fc8102f13912a8262b940c0ede2d5e710.zip |
texlive-bin-libre-2012.0-4: moving new revision to [libre] repo
Diffstat (limited to 'libre-testing/texlive-bin-libre')
8 files changed, 0 insertions, 1226 deletions
diff --git a/libre-testing/texlive-bin-libre/09-texlive-fonts.conf b/libre-testing/texlive-bin-libre/09-texlive-fonts.conf deleted file mode 100644 index f870fbd7a..000000000 --- a/libre-testing/texlive-bin-libre/09-texlive-fonts.conf +++ /dev/null @@ -1,9 +0,0 @@ -<?xml version="1.0"?> -<!DOCTYPE fontconfig SYSTEM "fonts.dtd"> -<fontconfig> - <dir>/usr/share/texmf-dist/fonts/opentype</dir> - <dir>/usr/share/texmf-dist/fonts/truetype</dir> - <dir>/usr/local/share/texmf/fonts/opentype</dir> - <dir>/usr/local/share/texmf/fonts/truetype</dir> -</fontconfig> - diff --git a/libre-testing/texlive-bin-libre/PKGBUILD b/libre-testing/texlive-bin-libre/PKGBUILD deleted file mode 100644 index d5571465f..000000000 --- a/libre-testing/texlive-bin-libre/PKGBUILD +++ /dev/null @@ -1,316 +0,0 @@ -# $Id: PKGBUILD 165207 2012-08-13 08:28:02Z remy $ -# Maintainer: Rémy Oudompheng <remy@archlinux.org> -# Contributor: francois <francois.archlinux.org> -# Maintainer (Parabola): Michał Masłowski <mtjm@mtjm.eu> -# Contributor (Parabola): André Silva <emulatorman@lavabit.com> - -pkgname=texlive-bin-libre -pkgver=2012.0 -pkgrel=4 -pkgdesc="TeX Live binaries" -license=('GPL') -arch=('i686' 'x86_64' 'mips64el') -depends=('t1lib' 'gd' 'poppler' 'libsigsegv' 'zziplib' 'libpng' 'libjpeg' 'freetype2') -makedepends=('perl' 'clisp' 'ffcall') -optdepends=('ed: for texconfig') -provides=('lcdf-typetools' 'kpathsea' 'xindy' 'pdfjam' 'texlive-bin') -conflicts=('pdfjam' 'texlive-bin') -replaces=('texlive-bin') -options=('!libtool' '!strip') -url='http://tug.org/texlive/' -install="texlive.install" -source=('texmf.cnf' - 'fix-fontforge-encoding.patch' - '09-texlive-fonts.conf' - 'poppler-0.20.patch' - 'http://mirrors.kernel.org/archlinux/other/texlive/texlive-bin-source-20120623.tar.xz' - 'http://mirrors.kernel.org/archlinux/other/texlive/texlive-bin-texmf-20120623.tar.xz' - 'luatex-r4449-radical-rule-thickness.patch' -) -backup=(etc/texmf/web2c/texmf.cnf \ - etc/texmf/chktex/chktexrc \ - etc/texmf/dvipdfm/config/config \ - etc/texmf/dvipdfmx/dvipdfmx.cfg \ - etc/texmf/dvips/config/config.ps \ - etc/texmf/tex/generic/config/language.dat \ - etc/texmf/tex/generic/config/language.def \ - etc/texmf/tex/generic/config/pdftexconfig.tex \ - etc/texmf/ttf2pk/ttf2pk.cfg \ - etc/texmf/web2c/fmtutil.cnf \ - etc/texmf/web2c/mktex.cnf \ - etc/texmf/xdvi/XDvi) - -md5sums=('220a4f4cc0d915bf8fcbcb553dcee1ae' - 'bfb9716aa00c86c08cd31e5b32edeb98' - '393a4bf67adc7ca5df2b386759d1a637' - 'e3a664d5a7f0923f35060fe9d25d2573' - 'ac2c3c3aa765581f8504e21a5edbfb9f' - 'f315a860158cfc952c82a6d759961024' - '5190f3295eb9a604c5f17f5bd607299b') - -build() { - if [ "${CARCH}" != "i686" ]; then - export CFLAGS="${CFLAGS} -fPIC" - export CXXFLAGS="${CXXFLAGS} -fPIC" - fi - - cd "$srcdir" - # this patch removes spurious error message with locale "xx_YY.utf8" - patch -Np0 -i fix-fontforge-encoding.patch - # fix build with poppler >= 0.20 - patch -Np0 -i poppler-0.20.patch - # fix radical rule thickness regression in Luatex - # http://tex.stackexchange.com/q/61952/729 - patch -Np0 -i luatex-r4449-radical-rule-thickness.patch - # t4ht expects to be un /usr/share/texmf/bin/t4ht (FS#27251) - sed -i s/SELFAUTOPARENT/TEXMFROOT/ source/texk/tex4htk/t4ht.c - ############################################################# - ### configure - cd source - ## prevent compiling Xdvi with libXp - sed -i~ 's|-lXp ||' texk/xdvik/configure - test ! -d Work && mkdir Work - cd Work - echo "--> Initial configuration..." - # we use temporary prefix to avoid messing the existing - # $pkgdir/usr/share/texmf tree - # system zlib is disabled due to issues with zlib 1.2.6 (FS#28221) - ../configure --prefix=/usr -C \ - --sysconfdir=/etc \ - --datarootdir=/usr/share \ - --datadir=/usr/share \ - --mandir=/usr/share/man \ - --disable-native-texlive-build \ - --with-banner-add="/Parabola GNU/Linux-libre" \ - --disable-multiplatform \ - --disable-dialog \ - --disable-psutils \ - --disable-t1utils \ - --disable-bibtexu \ - --disable-xz \ - --with-system-zlib \ - --with-system-zziplib \ - --with-system-pnglib \ - --with-system-ncurses \ - --with-system-t1lib \ - --with-system-gd \ - --with-system-poppler \ - --with-system-xpdf \ - --with-system-freetype2 \ - --without-system-graphite \ - --with-freetype2-libdir=/usr/lib \ - --with-freetype2-include=/usr/include/freetype2 \ - --with-xdvi-x-toolkit=xaw \ - --disable-dump-share \ - --disable-aleph \ - --enable-luatex \ - --with-clisp-runtime=default \ - --enable-xindy --disable-xindy-rules --disable-xindy-docs - ############################################################# - ### make - echo "-------------------------------------------------------" - echo "--> Building the whole beast ..." - echo "-------------------------------------------------------" - make -} - -package() { - cd "$srcdir" - ############################################################# - ### install texmf tree - echo "-------------------------------------------------------" - echo "--> installing the texmf tree" - echo "-------------------------------------------------------" - install -m755 -d "$pkgdir"/usr/share - cp -r texmf "$pkgdir"/usr/share/ - install -d -m755 "$pkgdir"/etc/texmf/web2c - install -d -m755 "$pkgdir"/etc/texmf/chktex - install -d -m755 "$pkgdir"/etc/texmf/dvips/config - install -d -m755 "$pkgdir"/etc/texmf/dvipdfm/config - install -d -m755 "$pkgdir"/etc/texmf/dvipdfmx - install -d -m755 "$pkgdir"/etc/texmf/tex/generic/config - install -d -m755 "$pkgdir"/etc/texmf/ttf2pk - install -d -m755 "$pkgdir"/etc/texmf/xdvi - install -d -m755 "$pkgdir"/etc/fonts/conf.avail - install -m644 "$srcdir"/09-texlive-fonts.conf "$pkgdir"/etc/fonts/conf.avail/ - # move man files to /usr/share/man - for i in 1 5; do - install -d -m755 "$pkgdir"/usr/share/man/man$i - mv "$pkgdir"/usr/share/texmf/doc/man/man$i/*.$i "$pkgdir"/usr/share/man/man$i/ - done - # move info files to /usr/share/info - install -d -m755 "$pkgdir"/usr/share/info - mv "$pkgdir"/usr/share/texmf/doc/info/*.info "$pkgdir"/usr/share/info/ - rm -rf "$pkgdir"/usr/share/texmf/doc/{man,info} - # copy config files to $TEXMFCONFIG tree - cp -a "$pkgdir"/usr/share/texmf/chktex/chktexrc \ - "$pkgdir"/etc/texmf/chktex/ - cp -a "$pkgdir"/usr/share/texmf/web2c/mktex.cnf \ - "$pkgdir"/etc/texmf/web2c/ - cp -a "$pkgdir"/usr/share/texmf/web2c/updmap.cfg \ - "$pkgdir"/etc/texmf/web2c/ - cp -a "$pkgdir"/usr/share/texmf/web2c/fmtutil.cnf \ - "$pkgdir"/etc/texmf/web2c/ - cp -a "$pkgdir"/usr/share/texmf/dvips/config/config.ps \ - "$pkgdir"/etc/texmf/dvips/config/ - cp -a "$pkgdir"/usr/share/texmf/dvipdfm/config/config \ - "$pkgdir"/etc/texmf/dvipdfm/config/ - cp -a "$pkgdir"/usr/share/texmf/dvipdfmx/dvipdfmx.cfg \ - "$pkgdir"/etc/texmf/dvipdfmx/ - cp -a "$pkgdir"/usr/share/texmf/tex/generic/config/pdftexconfig.tex \ - "$pkgdir"/etc/texmf/tex/generic/config/ - cp -a "$pkgdir"/usr/share/texmf/tex/generic/config/language.dat \ - "$pkgdir"/etc/texmf/tex/generic/config/ - cp -a "$pkgdir"/usr/share/texmf/tex/generic/config/language.def \ - "$pkgdir"/etc/texmf/tex/generic/config/ - cp -a "$pkgdir"/usr/share/texmf/ttf2pk/ttf2pk.cfg \ - "$pkgdir"/etc/texmf/ttf2pk/ - cp -a "$pkgdir"/usr/share/texmf/xdvi/XDvi \ - "$pkgdir"/etc/texmf/xdvi/ - # remove TL specific warnings in the language.{dat,def} files: - sed -i -e '/DO NOT EDIT/,+3 d' "$pkgdir"/etc/texmf/tex/generic/config/language.* - # clean updmap.cfg - sed -i '/^\(Map\|MixedMap\)/d' "$pkgdir"/etc/texmf/web2c/updmap.cfg - sed -i '/^#! \(Map\|MixedMap\)/d' "$pkgdir"/etc/texmf/web2c/updmap.cfg - # Don't list formats which need removed packages to work. - sed -i '/csplain\|mex\|jadetex/d' "$pkgdir"/etc/texmf/web2c/fmtutil.cnf - - ############################################################# - ### install - cd source - # fixes for xindy - find utils/xindy -name Makefile -exec sed -i -e "s|^prefix =.\+$|prefix = $pkgdir/usr|" -e "s|^mandir =.\+$|mandir = \${prefix}/share/man|" -e "s|^datadir =.\+$|datadir = \${datarootdir}/texmf|" -e "s|^docdir =.\+$|docdir = \${datadir}/doc/xindy|" '{}' \; - - echo "-------------------------------------------------------" - echo "--> Proceeding with make install ..." - echo "-------------------------------------------------------" - cd Work - make DESTDIR="${pkgdir}" texmf="$pkgdir"/usr/share/texmf install - rm -rf "${pkgdir}"/usr/{texmf,share/texmf-dist} - - # replace upstream texmf.cnf with ours - rm -f "$pkgdir"/usr/share/texmf/web2c/texmf.cnf - install -m644 "$srcdir"/texmf.cnf "$pkgdir"/etc/texmf/web2c/texmf.cnf - # since the location of texmf.cnf is hard-wired to be under /usr/share/texmf/web2c - # we make a symlink from /etc/texmf/web2c/texmf.cnf to the latter - ln -sf /etc/texmf/web2c/texmf.cnf "$pkgdir"/usr/share/texmf/web2c/texmf.cnf - # fix location of TEXMFCACHE for luatools - sed -i 's#texlive2010#texlive#' "$pkgdir"/usr/share/texmf/web2c/texmfcnf.lua - ## remove aleph from fmtutil.cnf - sed -i -e '/aleph/d' "$pkgdir"/usr/share/texmf/web2c/fmtutil.cnf - - ## install Perl libraries - mkdir -p "$pkgdir"/usr/share/tlpkg/TeXLive - install -m644 "${srcdir}"/source/utils/biber/TeXLive/*.pm "$pkgdir"/usr/share/tlpkg/TeXLive - - # create symlinks for formats - echo "--> Create symlinks for TeX formats ..." - PATH="$PATH:${pkgdir}/usr/bin" texlinks -f "$pkgdir"/usr/share/texmf/web2c/fmtutil.cnf "$pkgdir"/usr/bin/ - ############################################################# - # remove dangling symlinks - _bibtexextra_scripts=" -bibexport -listbib -urlbst -" - _core_scripts=" -afm2afm -arlatex -autoinst -bundledoc -checkcites -cmap2enc -ctanify -ctanupload -de-macro -dosepsbin -dviasm -epstopdf -findhyph -font2afm -fragmaster -installfont-tl -latex2man -latexdiff -latexdiff-vc -latexfileversion -latexmk -latexrevise -listings-ext.sh -match_parens -mf2pt1 -mkjobtexmf -mkluatexfontdb -mkt1font -mptopdf -ot2kpx -pdf180 -pdf270 -pdf90 -pdfatfi -pdfbook -pdfcrop -pdfflip -pdfjam -pdfjam-pocketmod -pdfjam-slides3up -pdfjam-slides6up -pdfjoin -pdfnup -pdfpun -pfm2kpx -pkfix -pkfix-helper -purifyeps -repstopdf -rpdfcrop -showglyphs -sty2dtx -texcount -texdef -texdiff -texdirflatten -texliveonfly -texloganalyser -typeoutfileinfo -thumbpdf -vpl2ovp -vpl2vpl -" - _htmlxml_scripts="ht htcontext htlatex htmex httex httexi htxelatex htxetex mk4ht" - _langcjk_scripts="convbkmk updmap-setup-kanji" - _langextra_scripts="ebong" - _langgreek_scripts="mkgrkindex" - _latexextra_scripts=" -authorindex -exceltex -makeglossaries -pdfannotextractor -perltex -ppower4 -ps4pdf -splitindex -svn-multi -vpe" - _music_scripts="m-tx musixtex musixflx pmx2pdf" - _pictures_scripts="cachepic epspdf epspdftk fig4latex mathspic" - _pstricks_scripts="pedigree pst2pdf" - _science_scripts="ulqda" - for s in \ - ${_bibtexextra_scripts} \ - ${_core_scripts} \ - ${_htmlxml_scripts} \ - ${_langcjk_scripts} \ - ${_langextra_scripts} \ - ${_langgreek_scripts} \ - ${_latexextra_scripts} \ - ${_music_scripts} \ - ${_pictures_scripts} \ - ${_pstricks_scripts} \ - ${_science_scripts} \ - tlmgr biber; do # biber is not built from source - rm -f "$pkgdir"/usr/bin/$s - done - ################################################################### -} - diff --git a/libre-testing/texlive-bin-libre/fix-fontforge-encoding.patch b/libre-testing/texlive-bin-libre/fix-fontforge-encoding.patch deleted file mode 100644 index 8104b3289..000000000 --- a/libre-testing/texlive-bin-libre/fix-fontforge-encoding.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- source/texk/web2c/luatexdir/luafontloader/fontforge/fontforge/noprefs.c.orig 2009-09-30 19:27:00.935039526 +0200 -+++ source/texk/web2c/luatexdir/luafontloader/fontforge/fontforge/noprefs.c 2009-09-30 19:28:04.908364646 +0200 -@@ -495,6 +495,9 @@ - { "Big5HKSCS", e_big5hkscs }, - { "Big5-HKSCS", e_big5hkscs }, - { "UTF-8", e_utf8 }, -+ { "utf-8", e_utf8 }, -+ { "UTF8", e_utf8 }, -+ { "utf8", e_utf8 }, - { "ISO-10646/UTF-8", e_utf8 }, - { "ISO_10646/UTF-8", e_utf8 }, - { "UCS2", e_unicode }, diff --git a/libre-testing/texlive-bin-libre/luatex-poppler-0.20.patch b/libre-testing/texlive-bin-libre/luatex-poppler-0.20.patch deleted file mode 100644 index 175824f3e..000000000 --- a/libre-testing/texlive-bin-libre/luatex-poppler-0.20.patch +++ /dev/null @@ -1,77 +0,0 @@ ---- source/texk/web2c/luatexdir/lua/lepdflib.cc.orig 2011-10-06 06:14:20.000000000 +0000 -+++ source/texk/web2c/luatexdir/lua/lepdflib.cc 2012-05-17 11:30:26.327236883 +0000 -@@ -157,7 +157,7 @@ - pdfdoc_changed_error(L); - uout = new_Annot_userdata(L); - uout->d = -- new Annot((XRef *) uxref->d, (Dict *) udict->d, (Catalog *) ucatalog->d, -+ new Annot((PDFDoc *) uxref->pd, (Dict *) udict->d, - (Object *) uref->d); - uout->atype = ALLOC_LEPDF; - uout->pc = uxref->pc; -@@ -179,7 +179,7 @@ - pdfdoc_changed_error(L); - uout = new_Annots_userdata(L); - uout->d = -- new Annots((XRef *) uxref->d, (Catalog *) ucatalog->d, -+ new Annots((PDFDoc *) uxref->pd, - (Object *) uannotsobj->d); - uout->atype = ALLOC_LEPDF; - uout->pc = uxref->pc; -@@ -369,7 +369,7 @@ - // Annot - - m_poppler_get_BOOL(Annot, isOk); --m_poppler_get_OBJECT(Annot, getAppearance); -+m_poppler_get_OBJECT(Annot, getAppearanceResDict); - m_poppler_get_poppler(Annot, AnnotBorder, getBorder); - - static int m_Annot_match(lua_State * L) -@@ -408,7 +408,7 @@ - - static const struct luaL_Reg Annot_m[] = { - {"isOk", m_Annot_isOk}, -- {"getAppearance", m_Annot_getAppearance}, -+ {"getAppearance", m_Annot_getAppearanceResDict}, - {"getBorder", m_Annot_getBorder}, - {"match", m_Annot_match}, - {"__tostring", m_Annot__tostring}, -@@ -1433,7 +1433,7 @@ - - static int m_Object_getTypeName(lua_State * L) - { -- char *s; -+ const char *s; - udstruct *uin; - uin = (udstruct *) luaL_checkudata(L, 1, M_Object); - if (uin->pd != NULL && uin->pd->pc != uin->pc) -@@ -2120,7 +2120,7 @@ - if ((uin->pd != NULL && uin->pd->pc != uin->pc) - || (ucat->pd != NULL && ucat->pd->pc != ucat->pd->pc)) - pdfdoc_changed_error(L); -- links = ((Page *) uin->d)->getLinks((Catalog *) ucat->d); -+ links = ((Page *) uin->d)->getLinks(); - if (links != NULL) { - uout = new_Links_userdata(L); - uout->d = links; -@@ -2738,7 +2738,10 @@ - return 1; - } - --m_poppler_get_INT(XRef, getSize); -+static int m_XRef_getSize(lua_State * L) -+{ -+ return m_XRef_getNumObjects(L); -+} - - static int m_XRef_getEntry(lua_State * L) - { -@@ -2748,7 +2751,7 @@ - if (uin->pd != NULL && uin->pd->pc != uin->pc) - pdfdoc_changed_error(L); - i = luaL_checkint(L, 2); -- size = ((XRef *) uin->d)->getSize(); -+ size = ((XRef *) uin->d)->getNumObjects(); - if (i > 0 && i <= size) { - uout = new_XRefEntry_userdata(L); - uout->d = ((XRef *) uin->d)->getEntry(i); diff --git a/libre-testing/texlive-bin-libre/luatex-r4449-radical-rule-thickness.patch b/libre-testing/texlive-bin-libre/luatex-r4449-radical-rule-thickness.patch deleted file mode 100644 index f925a1a93..000000000 --- a/libre-testing/texlive-bin-libre/luatex-r4449-radical-rule-thickness.patch +++ /dev/null @@ -1,23 +0,0 @@ -Index: source/texk/web2c/luatexdir/tex/mlist.w -=================================================================== ---- source/texk/web2c/luatexdir/tex/mlist.w (revision 4448) -+++ source/texk/web2c/luatexdir/tex/mlist.w (revision 4449) -@@ -1798,7 +1798,17 @@ - theta = fraction_rule(cur_style); - y = var_delimiter(left_delimiter(q), cur_size, - height(x) + depth(x) + clr + theta, NULL, cur_style); -- theta = height(y); -+ /* If |y| is a composite then set |theta| to the height of its top -+ character, else set it to the height of |y|. */ -+ if (list_ptr(y) != null -+ && type(list_ptr(y)) == hlist_node -+ && list_ptr(list_ptr(y)) != null -+ && type(list_ptr(list_ptr(y))) == glyph_node) { /* and it should be */ -+ theta = char_height(font(list_ptr(list_ptr(y))), -+ character(list_ptr(list_ptr(y)))); -+ } else { -+ theta = height(y); -+ } - } else { - y = var_delimiter(left_delimiter(q), cur_size, - height(x) + depth(x) + clr + theta, NULL, cur_style); diff --git a/libre-testing/texlive-bin-libre/poppler-0.20.patch b/libre-testing/texlive-bin-libre/poppler-0.20.patch deleted file mode 100644 index 3bd8183ab..000000000 --- a/libre-testing/texlive-bin-libre/poppler-0.20.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- source/texk/web2c/luatexdir/lua/lepdflib.cc.orig 2011-10-06 06:14:20.000000000 +0000 -+++ source/texk/web2c/luatexdir/lua/lepdflib.cc 2012-05-17 11:30:26.327236883 +0000 -@@ -1433,7 +1433,7 @@ - - static int m_Object_getTypeName(lua_State * L) - { -- char *s; -+ const char *s; - udstruct *uin; - uin = (udstruct *) luaL_checkudata(L, 1, M_Object); - if (uin->pd != NULL && uin->pd->pc != uin->pc) ---- source/texk/web2c/pdftexdir/pdftosrc.cc.orig 2012-06-24 17:12:34.376329435 +0200 -+++ source/texk/web2c/pdftexdir/pdftosrc.cc 2012-06-24 17:12:25.490003152 +0200 -@@ -134,7 +134,7 @@ - exit(1); - } - if (extract_xref_table) { -- int size = xref->getSize(); -+ int size = xref->getNumObjects(); - int i; - for (i = 0; i < size; i++) { - if (xref->getEntry(i)->offset == 0xffffffff) diff --git a/libre-testing/texlive-bin-libre/texlive.install b/libre-testing/texlive-bin-libre/texlive.install deleted file mode 100644 index 06a40a3b3..000000000 --- a/libre-testing/texlive-bin-libre/texlive.install +++ /dev/null @@ -1,43 +0,0 @@ -infodir=usr/share/info -filelist=(dvipng.info dvips.info eplain.info epspdf.info fontname.info kpathsea.info latex2e-es.info latex2e.info latex2man.info mf2pt1.info tds.info texdraw.info web2c.info) - -post_install() { - echo ">>> texlive: updating the filename database..." - usr/bin/mktexlsr - echo -n "creating all formats..." - usr/bin/fmtutil-sys --all 1>/dev/null - echo " done." - echo " (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)" - - [[ -x usr/bin/install-info ]] || return 0 - for file in "${filelist[@]}"; do - install-info "$infodir/$file.gz" "$infodir/dir" 2> /dev/null - done -} - -post_upgrade() { - local corename corever _pacout - echo ">>> texlive: updating the filename database..." - usr/bin/mktexlsr - _pacout=$(pacman -Q texlive-core 2>/dev/null) - read corename corever <<< ${_pacout} - if [[ ${corever} == 2012* ]]; then - echo -n "recreating all formats..." - usr/bin/fmtutil-sys --all 1>/dev/null - echo " done." - echo " (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)" - else - echo "WARNING: not recreating formats since texlive-core has version '$corever'" - fi - [[ -x usr/bin/install-info ]] || return 0 - for file in "${filelist[@]}"; do - install-info "$infodir/$file.gz" "$infodir/dir" 2> /dev/null - done -} - -pre_remove() { - [[ -x usr/bin/install-info ]] || return 0 - for file in "${filelist[@]}"; do - install-info --delete "$infodir/$file.gz" "$infodir/dir" 2> /dev/null - done -} diff --git a/libre-testing/texlive-bin-libre/texmf.cnf b/libre-testing/texlive-bin-libre/texmf.cnf deleted file mode 100644 index 76975ee5c..000000000 --- a/libre-testing/texlive-bin-libre/texmf.cnf +++ /dev/null @@ -1,724 +0,0 @@ -% texmf.cnf for TeXLive/Arch Linux -- runtime path configuration file for kpathsea. -% Public domain. -% -% If you modify this original file, YOUR CHANGES WILL BE LOST when it is -% updated. Instead, put your changes -- and only your changes, not an -% entire copy of the full texmf.cnf! -- in ../../texmf.cnf. That is, if -% this file is installed in /some/path/to/texlive/2011/texmf/web2c/texmf.cnf, -% add your custom settings to /some/path/to/texlive/2011/texmf.cnf. -% -% What follows is a super-summary of what this .cnf file can -% contain. Please read the Kpathsea manual for more information. -% -% Any identifier (sticking to A-Za-z_ for names is safest) can be assigned. -% The `=' (and surrounding spaces) is optional. -% $foo (or ${foo}) in a value expands to the envvar or cnf value of foo. -% Long lines can be continued with a \. -% -% Earlier entries (in the same or another file) override later ones, and -% an environment variable foo overrides any texmf.cnf definition of foo. -% -% All definitions are read before anything is expanded, so you can use -% variables before they are defined. -% -% If a variable assignment is qualified with `.PROGRAM', it is ignored -% unless the current executable (last filename component of argv[0]) is -% named PROGRAM. This foo.PROGRAM construct is not recognized on the -% right-hand side. For environment variables, use FOO_PROGRAM. -% -% Which file formats use which paths for searches is described in the -% various programs' and the Kpathsea documentation (http://tug.org/kpathsea). -% -% // means to search subdirectories (recursively). -% A leading !! means to look only in the ls-R db, never on the disk. -% In this file, either ; or : can be used to separate path components. -% A leading/trailing/doubled path separator in the paths will be -% expanded into the compile-time default. Probably not what you want. -% -% Brace notation is supported, for example: /usr/local/{mytex,othertex} -% expands to /usr/local/mytex:/usr/local/othertex. We make extensive -% use of this. - - -% Part 1: Search paths and directories. - -% This is the parent directory of our several trees, i.e., -% /usr/local/texlive/YYYY in the original TeX Live distribution. -% -% All trees must be organized according to the TeX Directory Structure -% (http://tug.org/tds), or files may not be found. -% -% Redistributors will probably want $SELFAUTODIR/share, i.e., /usr/share. -TEXMFROOT = $SELFAUTODIR/share - -% The tree containing runtime files related to the specific -% distribution and version. -TEXMFMAIN = $TEXMFROOT/texmf - -% The main tree of packages, distribution-agnostic: -TEXMFDIST = $TEXMFROOT/texmf-dist - -% Local additions to the distribution trees. -TEXMFLOCAL = /usr/local/share/texmf - -% TEXMFSYSVAR, where *-sys store cached runtime data. -TEXMFSYSVAR = /var/lib/texmf - -% TEXMFSYSCONFIG, where *-sys store configuration data. -TEXMFSYSCONFIG = /etc/texmf - -% Per-user texmf tree(s) -- organized per the TDS, as usual. To define -% more than one per-user tree, set this to a list of directories in -% braces, as described above. (This used to be HOMETEXMF.) ~ expands -% to %USERPROFILE% on Windows, $HOME otherwise. -TEXMFHOME = ~/texmf - -% TEXMFVAR, where texconfig/updmap/fmtutil store cached runtime data. -TEXMFVAR = ~/.texlive/texmf-var - -% TEXMFCONFIG, where texconfig/updmap/fmtutil store configuration data. -TEXMFCONFIG = ~/.texlive/texmf-config - -% List all the texmf trees. -% -% For texconfig to work properly, TEXMFCONFIG and TEXMFVAR should be named -% explicitly and before all other trees. -% -% TEXMFLOCAL follows TEXMFMAIN (and precedes TEXMFDIST) because the -% files in TEXMFMAIN are tightly coupled with the particular version of -% the distribution, such as configuration files. Overriding them would -% be more likely to cause trouble than help. On the other hand, the -% bulk of packages and fonts are in TEXMFDIST, and locally-installed -% versions should take precedence over those -- although it is generally -% a source of confusion to have different versions of a package -% installed, whatever the trees, so try to avoid it. -TEXMF = {$TEXMFCONFIG,$TEXMFVAR,$TEXMFHOME,!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST} - -% Where to look for ls-R files. There need not be an ls-R in the -% directories in this path, but if there is one, Kpathsea will use it. -% By default, this is only the !! elements of TEXMF, so that mktexlsr -% does not create ls-R files in the non-!! elements -- because if an -% ls-R is present, it will be used, and the disk will not be searched. -% This is arguably a bug in kpathsea. -TEXMFDBS = {!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST} - -% The system trees. These are the trees that are shared by all users. -% If a tree appears in this list, the mktex* scripts will use -% VARTEXFONTS for generated files, if the original tree isn't writable; -% otherwise the current working directory is used. -SYSTEXMF = $TEXMFSYSVAR;$TEXMFMAIN;$TEXMFLOCAL;$TEXMFDIST - -% Where generated fonts may be written. This tree is used when the sources -% were found in a system tree and either that tree wasn't writable, or the -% varfonts feature was enabled in MT_FEATURES in mktex.cnf. -VARTEXFONTS = $TEXMFVAR/fonts - -% On some systems, there will be a system tree which contains all the font -% files that may be created as well as the formats. For example -% TEXMFVAR = /var/lib/texmf -% is used in many distros. In this case, set VARTEXFONTS like this -%VARTEXFONTS = $TEXMFVAR/fonts -% and do not mention it in TEXMFDBS (but _do_ mention TEXMFVAR). -% -% Remove $VARTEXFONTS from TEXMFDBS if the VARTEXFONTS directory is below -% one of the TEXMF directories (avoids overlapping ls-R files). - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% Usually you will not need to edit any of the following variables. -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - -% WEB2C is for Web2C specific files. The current directory may not be -% a good place to look for them. -WEB2C = $TEXMF/web2c - -% TEXINPUTS is for TeX input files -- i.e., anything to be found by \input -% or \openin, including .sty, .eps, etc. We specify paths for all known -% formats, past or present. Not all of them are built these days. - -% Plain TeX. Have the command tex check all directories as a last -% resort, we may have plain-compatible stuff anywhere. -TEXINPUTS.tex = .;$TEXMF/tex/{plain,generic,}// - -% Fontinst needs to read afm files. -TEXINPUTS.fontinst = .;$TEXMF/{tex,fonts/afm}// - -% Other plain-based formats. -TEXINPUTS.amstex = .;$TEXMF/tex/{amstex,plain,generic,}// -TEXINPUTS.csplain = .;$TEXMF/tex/{csplain,plain,generic,}// -TEXINPUTS.eplain = .;$TEXMF/tex/{eplain,plain,generic,}// -TEXINPUTS.ftex = .;$TEXMF/tex/{formate,plain,generic,}// -TEXINPUTS.mex = .;$TEXMF/tex/{mex,plain,generic,}// -TEXINPUTS.texinfo = .;$TEXMF/tex/{texinfo,plain,generic,}// - -% LaTeX 2e specific macros are stored in latex/, macros that can only be -% used with 2.09 in latex209/. In addition, we look in the directory -% latex209, useful for macros that were written for 2.09 and do not -% mention 2e at all, but can be used with 2e. -TEXINPUTS.cslatex = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}// -TEXINPUTS.latex = .;$TEXMF/tex/{latex,generic,}// -TEXINPUTS.latex209 = .;$TEXMF/tex/{latex209,generic,latex,}// -TEXINPUTS.olatex = .;$TEXMF/tex/{latex,generic,}// - -% MLTeX. -TEXINPUTS.frlatex = .;$TEXMF/tex/{french,latex,generic,}// -TEXINPUTS.frtex = .;$TEXMF/tex/{french,plain,generic,}// -TEXINPUTS.mllatex = .;$TEXMF/tex/{latex,generic,}// -TEXINPUTS.mltex = .;$TEXMF/tex/{plain,generic,}// - -% e-TeX. -TEXINPUTS.elatex = .;$TEXMF/tex/{latex,generic,}// -TEXINPUTS.etex = .;$TEXMF/tex/{plain,generic,}// - -% pdfTeX. -TEXINPUTS.pdfcslatex = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}// -TEXINPUTS.pdfcsplain = .;$TEXMF/tex/{csplain,plain,generic,}// -TEXINPUTS.pdflatex = .;$TEXMF/tex/{latex,generic,}// -TEXINPUTS.pdfmex = .;$TEXMF/tex/{mex,plain,generic,}// -TEXINPUTS.utf8mex = .;$TEXMF/tex/{mex,plain,generic,}// -TEXINPUTS.pdftex = .;$TEXMF/tex/{plain,generic,}// -TEXINPUTS.pdftexinfo = .;$TEXMF/tex/{texinfo,plain,generic,}// -TEXINPUTS.pdfamstex = .;$TEXMF/tex/{amstex,plain,generic,}// - -% pdfeTeX. -TEXINPUTS.pdfelatex = .;$TEXMF/tex/{latex,generic,}// -TEXINPUTS.pdfetex = .;$TEXMF/tex/{plain,generic,}// - -% pdfxTeX. -TEXINPUTS.pdfxlatex = .;$TEXMF/tex/{latex,generic,}// -TEXINPUTS.pdfxmex = .;$TEXMF/tex/{mex,plain,generic,}// -TEXINPUTS.pdfxtex = .;$TEXMF/tex/{plain,generic,}// - -% LuaTeX. -TEXINPUTS.lualatex = .;$TEXMF/tex/{lualatex,latex,luatex,generic,}// -TEXINPUTS.luatex = .;$TEXMF/tex/{luatex,plain,generic,}// -TEXINPUTS.dvilualatex = .;$TEXMF/tex/{lualatex,latex,luatex,generic,}// -TEXINPUTS.dviluatex = .;$TEXMF/tex/{luatex,plain,generic,}// - -% XeTeX. -TEXINPUTS.xelatex = .;$TEXMF/tex/{xelatex,latex,xetex,generic,}// -TEXINPUTS.xeplain = .;$TEXMF/tex/{xeplain,eplain,plain,xetex,generic,}// -TEXINPUTS.xetex = .;$TEXMF/tex/{xetex,plain,generic,}// - -% Omega / Aleph. -TEXINPUTS.aleph = .;$TEXMF/tex/{plain,generic,}// -TEXINPUTS.elambda = .;$TEXMF/tex/{lambda,latex,generic,}// -TEXINPUTS.eomega = .;$TEXMF/tex/{plain,generic,}// -TEXINPUTS.lambda = .;$TEXMF/tex/{lambda,latex,generic,}// -TEXINPUTS.lamed = .;$TEXMF/tex/{lamed,lambda,latex,generic,}// -TEXINPUTS.omega = .;$TEXMF/tex/{plain,generic,}// - -% p(La)TeX. -TEXINPUTS.ptex = .;$TEXMF/tex/{ptex,ptexgeneric,plain,generic,}// -TEXINPUTS.platex = .;$TEXMF/tex/{platex,ptexgeneric,latex,generic,}// - -% epTeX. -TEXINPUTS.eptex = .;$TEXMF/tex/{ptex,ptexgeneric,plain,generic,}// - -% pBibTeX bibliographies and style files. -BIBINPUTS.pbibtex = .;$TEXMF/{pbibtex,bibtex}/bib// -BSTINPUTS.pbibtex = .;$TEXMF/{pbibtex,bibtex}/bst// - -% ConTeXt. -TEXINPUTS.context = .;$TEXMF/tex/{context,plain,generic,}// - -% jadetex. -TEXINPUTS.jadetex = .;$TEXMF/tex/{jadetex,latex,generic,}// -TEXINPUTS.pdfjadetex = .;$TEXMF/tex/{jadetex,latex,generic,}// - -% XMLTeX. -TEXINPUTS.xmltex = .;$TEXMF/tex/{xmltex,latex,generic,}// -TEXINPUTS.pdfxmltex = .;$TEXMF/tex/{xmltex,latex,generic,}// - -% Miscellany, no longer built. -TEXINPUTS.lamstex = .;$TEXMF/tex/{lamstex,plain,generic,}// -TEXINPUTS.lollipop = .;$TEXMF/tex/{lollipop,plain,generic,}// -TEXINPUTS.frpdflatex = .;$TEXMF/tex/{french,latex,generic,}// -TEXINPUTS.frpdftex = .;$TEXMF/tex/{french,plain,generic,}// - -% Earlier entries override later ones, so put this generic one last. -TEXINPUTS = .;$TEXMF/tex/{$progname,generic,}// - -% ttf2tfm. -TTF2TFMINPUTS = .;$TEXMF/ttf2pk// - -% Metafont, MetaPost inputs. -MFINPUTS = .;$TEXMF/metafont//;{$TEXMF/fonts,$VARTEXFONTS}/source// -MPINPUTS = .;$TEXMF/metapost// - -% Dump files (fmt/base/mem) for vir{tex,mf,mp} to read. -% We want to find the engine-specific file, e.g., cont-en.fmt can -% exist under both pdftex/ and xetex/. But just in case some formats -% end up without an engine directory, look directly in web2c/ too. -% We repeat the same definition three times because of the way fmtutil -% is implemented; if we use ${TEXFORMATS}, the mpost/mf/etc. formats -% will not be found. -TEXFORMATS = .;$TEXMF/web2c{/$engine,} -MFBASES = .;$TEXMF/web2c{/$engine,} -MPMEMS = .;$TEXMF/web2c{/$engine,} -% -% As of 2008, pool files don't exist any more (the strings are compiled -% into the binaries), but just in case something expects to find these: -TEXPOOL = .;$TEXMF/web2c -MFPOOL = ${TEXPOOL} -MPPOOL = ${TEXPOOL} - -% support the original xdvi. Must come before the generic settings. -PKFONTS.XDvi = .;$TEXMF/%s;$VARTEXFONTS/pk/{%m,modeless}// -VFFONTS.XDvi = .;$TEXMF/%s -PSHEADERS.XDvi = .;$TEXMF/%q{dvips,fonts/type1}// -TEXPICTS.XDvi = .;$TEXMF/%q{dvips,tex}// - -% Device-independent font metric files. -VFFONTS = .;$TEXMF/fonts/vf// -TFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/tfm// - -% The $MAKETEX_MODE below means the drivers will not use a cx font when -% the mode is ricoh. If no mode is explicitly specified, kpse_prog_init -% sets MAKETEX_MODE to /, so all subdirectories are searched. See the manual. -% The modeless part guarantees that bitmaps for PostScript fonts are found. -PKFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/pk/{$MAKETEX_MODE,modeless}// - -% Similarly for the GF format, which only remains in existence because -% Metafont outputs it (and MF isn't going to change). -GFFONTS = .;$TEXMF/fonts/gf/$MAKETEX_MODE// - -% A backup for PKFONTS and GFFONTS. Not used for anything. -GLYPHFONTS = .;$TEXMF/fonts - -% A place to puth everything that doesn't fit the other font categories. -MISCFONTS = .;$TEXMF/fonts/misc// - -% font name map files. This isn't just fonts/map// because ConTeXt -% wants support for having files with the same name in the different -% subdirs. Maybe if the programs ever get unified to accepting the same -% map file syntax the definition can be simplified again. -TEXFONTMAPS = .;$TEXMF/fonts/map/{$progname,pdftex,dvips,}// - -% BibTeX bibliographies and style files. bibtex8 also uses these. -BIBINPUTS = .;$TEXMF/bibtex/bib// -BSTINPUTS = .;$TEXMF/bibtex/{bst,csf}// - -% MlBibTeX. -MLBIBINPUTS = .;$TEXMF/bibtex/bib/{mlbib,}// -MLBSTINPUTS = .;$TEXMF/bibtex/{mlbst,bst}// - -% .ris and .bltxml bibliography formats. -RISINPUTS = .;$TEXMF/bibtex/ris// -BLTXMLINPUTS = .;$TEXMF/bibtex/bltxml// - -% MFT style files. -MFTINPUTS = .;$TEXMF/mft// - -% PostScript headers and prologues (.pro); unfortunately, some programs -% also use this for acessing font files (enc, type1, truetype) -TEXPSHEADERS = .;$TEXMF/{dvips,fonts/{enc,type1,type42,type3}}// -TEXPSHEADERS.gsftopk = .;$TEXMF/{dvips,fonts/{enc,type1,type42,type3,truetype}}// - -% OSFONTDIR is to provide a convenient hook for allowing TeX to find -% fonts installed on the system (outside of TeX). An empty default -% value would add "//" to the search paths, so we give it a dummy value. -% OSFONTDIR = /usr/share/fonts - -% PostScript Type 1 outline fonts. -T1FONTS = .;$TEXMF/fonts/type1//;$OSFONTDIR// - -% PostScript AFM metric files. -AFMFONTS = .;$TEXMF/fonts/afm//;$OSFONTDIR// - -% TrueType outline fonts. -TTFONTS = .;$TEXMF/fonts/{truetype,opentype}//;$OSFONTDIR// - -% OpenType outline fonts. -OPENTYPEFONTS = .;$TEXMF/fonts/{opentype,truetype}//;$OSFONTDIR// - -% Type 42 outline fonts. -T42FONTS = .;$TEXMF/fonts/type42// - -% Ligature definition files. -LIGFONTS = .;$TEXMF/fonts/lig// - -% Dvips' config.* files (this name should not start with `TEX'!). -TEXCONFIG = $TEXMF/dvips// - -% Makeindex style (.ist) files. -INDEXSTYLE = .;$TEXMF/makeindex// - -% Font encoding files (.enc). -ENCFONTS = .;$TEXMF/fonts/enc// - -% CMap files. -CMAPFONTS = .;$TEXMF/fonts/cmap// - -% Subfont definition files. -SFDFONTS = .;$TEXMF/fonts/sfd// - -% OpenType feature files (.fea). -FONTFEATURES=.;$TEXMF/fonts/fea// - -% .cid and .cidmap -FONTCIDMAPS=.;$TEXMF/fonts/cid// - -% pdftex config files: -PDFTEXCONFIG = .;$TEXMF/pdftex/{$progname,}// - -% Used by DMP (ditroff-to-mpx), called by makempx -troff. -TRFONTS = /usr{/local,}/share/groff/{current/font,site-font}/devps -MPSUPPORT = .;$TEXMF/metapost/support - -% For xdvi to find mime.types and .mailcap, if they do not exist in -% ~. These are single directories, not paths. -% (But the default mime.types, at least, may well suffice.) -MIMELIBDIR = /etc -MAILCAPLIBDIR = /etc - -% Default settings for the fontconfig library as used by the Windows -% versions of xetex/xdvipdfmx. On Unixish systems, fontconfig ignores -% this. ConTeXT MkIV (all platforms) also use these values. -% -FONTCONFIG_FILE = fonts.conf -FONTCONFIG_PATH = $TEXMFSYSVAR/fonts/conf -FC_CACHEDIR = $TEXMFSYSVAR/fonts/cache - -% TeX documentation and source files, for use with texdoc and kpsewhich. -TEXDOCS = $TEXMF/doc// -TEXSOURCES = .;$TEXMF/source// - -% Web and CWeb input paths. -WEBINPUTS = .;$TEXMF/web// -CWEBINPUTS = .;$TEXMF/cweb// - -% Omega-related fonts and other files. -OFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/{ofm,tfm}// -OPLFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/opl// -OVFFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/{ovf,vf}// -OVPFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/ovp// -OTPINPUTS = .;$TEXMF/omega/otp// -OCPINPUTS = .;$TEXMF/omega/ocp// - -% Some additional input variables for several programs. If you add -% a program that uses the `other text files' or `other binary files' -% search formats, you'll want to add their variables here as well. -T4HTINPUTS = .;$TEXMF/tex4ht// - -%% t4ht utility, sharing files with TeX4ht -TEX4HTFONTSET=alias,iso8859,unicode -TEX4HTINPUTS = .;$TEXMF/tex4ht/base//;$TEXMF/tex4ht/ht-fonts/{$TEX4HTFONTSET}// - -% TeXworks editor configuration and settings -TW_LIBPATH = $TEXMFCONFIG/texworks -TW_INIPATH = $TW_LIBPATH - -% For security, do not look in . for dvipdfmx.cfg, since the D option -% would allow command execution. -DVIPDFMXINPUTS = $TEXMF/dvipdfmx - -% Lua needs to look in TEXINPUTS for lua scripts distributed with packages. -% -% But we can't simply use $TEXINPUTS, since then if TEXINPUTS is set in -% the environment with a colon, say, TEXINPUTS=/some/dir:, the intended -% default expansion of TEXINPUTS will not happen and .lua files under -% the /tex/ will not be found. -% -% So, duplicate the TEXINPUTS.*lualatex values as LUAINPUTS.*lualatex. -% The default LUAINPUTS sufficess for luatex and dviluatex. -% -LUAINPUTS.lualatex = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{lualatex,latex,luatex,generic,}// -LUAINPUTS.dvilualatex = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{lualatex,latex,luatex,generic,}// -LUAINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{luatex,plain,generic,}// - -% Lua needs to look for binary lua libraries distributed with packages. -CLUAINPUTS = .;$SELFAUTOLOC/lib/{$progname,$engine,}/lua// - -% Architecture independent executables. -TEXMFSCRIPTS = $TEXMF/scripts/{$progname,$engine,}// - -% Other languages. -JAVAINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/java// -PERLINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/perl// -PYTHONINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/python// -RUBYINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/ruby// - - -%% The mktex* scripts rely on KPSE_DOT. Do not set it in the environment. -% KPSE_DOT = . - -% This definition isn't used from this .cnf file itself (that would be -% paradoxical), but the compile-time default in paths.h is built from it. -% The SELFAUTO* variables are set automatically from the location of -% argv[0], in kpse_set_program_name. -% -% This main texmf.cnf file is installed, for a release YYYY, in a -% directory such as /usr/local/texlive/YYYY/texmf/web2c/texmf.cnf. -% Since this file is subject to future updates, the TeX Live installer -% or human administrator may also create a file -% /usr/local/texlive/YYYY/texmf.cnf; any settings in this latter file -% will take precedence over the distributed one under texmf/web2c. -% -% For security reasons, it is better not to include . in this path. -% -TEXMFCNF = {$SELFAUTOLOC,$SELFAUTODIR,$SELFAUTOPARENT}{,{/share,}/texmf{-local,}/web2c} - -% kpathsea 3.5.3 and later sets these at runtime. To avoid empty -% expansions from binaries linked against an earlier version of the -% library, we set $progname and $engine to something non-empty: -progname = unsetprogname -engine = unsetengine - - -% Part 2: Options. - -% If this option is set to true, `tex a.b' will look first for a.b.tex -% (within each path element), and then for a.b, i.e., we try standard -% extensions first. If this is false, we first look for a.b and then -% a.b.tex, i.e., we try the name as-is first. -% -% Both names are always tried; the difference is the order in which they -% are tried. The setting applies to all searches, not just .tex. -% -% This setting only affects names being looked up which *already* have -% an extension. A name without an extension (e.g., `tex story') will -% always have an extension added first. -% -% The default is true, because we already avoid adding the standard -% extension(s) in the usual cases. E.g., babel.sty will only look for -% babel.sty, not babel.sty.tex, regardless of this setting. -try_std_extension_first = t - -% Enable system commands via \write18{...}. When enabled fully (set to -% t), obviously insecure. When enabled partially (set to p), only the -% commands listed in shell_escape_commands are allowed. Although this -% is not fully secure either, it is much better, and so useful that we -% enable it for everything but bare tex. -shell_escape = p - -% No spaces in this command list. -% -% The programs listed here are as safe as any we know: they either do -% not write any output files, respect openout_any, or have hard-coded -% restrictions similar or higher to openout_any=p. They also have no -% features to invoke arbitrary other programs, and no known exploitable -% bugs. All to the best of our knowledge. They also have practical use -% for being called from TeX. -% -shell_escape_commands = \ -bibtex,bibtex8,\ -kpsewhich,\ -makeindex,\ -repstopdf,\ - -% we'd like to allow: -% dvips - but external commands can be executed, need at least -R1. -% epspdf, ps2pdf, pstopdf - need to respect openout_any, -% and gs -dSAFER must be used and check for shell injection with filenames. -% (img)convert (ImageMagick) - delegates.mgk possible misconfig, besides, -% without Unix convert it hardly seems worth it, and Windows convert -% is something completely different that destroys filesystems, so skip. -% pygmentize - but is the filter feature insecure? -% ps4pdf - but it calls an unrestricted latex. -% rpdfcrop - maybe ok, but let's get experience with repstopdf first. -% texindy,xindy - but is the module feature insecure? -% ulqda - but requires optional SHA1.pm, so why bother. -% tex, latex, etc. - need to forbid --shell-escape, and inherit openout_any. - -% plain TeX should remain unenhanced. -shell_escape.tex = f -shell_escape.initex = f - -% This is used by the Windows script wrapper for restricting searching -% for the purportedly safe shell_escape_commands above to system -% directories. -TEXMF_RESTRICTED_SCRIPTS = \ - {!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST}/scripts/{$progname,$engine,}// - -% Allow TeX \openin, \openout, or \input on filenames starting with `.' -% (e.g., .rhosts) or outside the current tree (e.g., /etc/passwd)? -% a (any) : any file can be opened. -% r (restricted) : disallow opening "dotfiles". -% p (paranoid) : as `r' and disallow going to parent directories, and -% restrict absolute paths to be under $TEXMFOUTPUT. -openout_any = p -openin_any = a - -% Write .log/.dvi/etc. files here, if the current directory is unwritable. -%TEXMFOUTPUT = /tmp - -% If a dynamic file creation fails, log the command to this file, in -% either the current directory or TEXMFOUTPUT. Set to the -% empty string or 0 to avoid logging. -MISSFONT_LOG = missfont.log - -% Set to a colon-separated list of words specifying warnings to suppress. -% To suppress everything, use TEX_HUSH = all; this is currently equivalent to -% TEX_HUSH = checksum:lostchar:readable:special -% To suppress nothing, use TEX_HUSH = none or do not set the variable at all. -TEX_HUSH = none - -% Allow TeX, and MF to parse the first line of an input file for -% the %&format construct. -parse_first_line = t - -% But don't parse the first line if invoked as "tex", since we want that -% to remain Knuth-compatible. The src_specials and -% file_line_error_style settings, as well as the options -enctex, -% -mltex, -8bit, etc., also affect this, but they are all off by default. -parse_first_line.tex = f -parse_first_line.initex = f - -% Control file:line:error style messages. -file_line_error_style = f - -% Enable the mktex... scripts by default? These must be set to 0 or 1. -% Particular programs can and do override these settings, for example -% dvips's -M option. Your first chance to specify whether the scripts -% are invoked by default is at configure time. -% -% These values are ignored if the script names are changed; e.g., if you -% set DVIPSMAKEPK to `foo', what counts is the value of the environment -% variable/config value `FOO', not the `MKTEXPK' value. -% -%MKTEXTEX = 0 -%MKTEXPK = 0 -%MKTEXMF = 0 -%MKTEXTFM = 0 -%MKTEXFMT = 0 -%MKOCP = 0 -%MKOFM = 0 - -% Used by makempx to run TeX. We use "etex" because MetaPost is -% expecting DVI, and not "tex" because we want first line parsing. -TEX = etex - -% These variables specify the external program called for the -% interactive `e' option. %d is replaced by the line number and %s by -% the current filename. The default is specified at compile-time, and -% we let that stay in place since different platforms like different values. -%TEXEDIT = vi +%d '%s' % default for Unix -%TEXEDIT = texworks --position=+%d "%s" % default for Windows -%MFEDIT = ${TEXEDIT} -%MPEDIT = ${TEXEDIT} - -% The default `codepage and sort order' file for BibTeX8, when none is -% given as command line option or environment variable. -BIBTEX_CSFILE = 88591lat.csf - -% This variable is specific to Windows. It must be set to 0 or 1. The -% default is 0. Setting it to 1 tells the Windows script wrappers to -% use an already installed Perl interpreter if one is found on the -% search path, in preference to the Perl shipped with TeX Live. Thus, -% it may be useful if you both (a) installed a full Perl distribution -% for general use, and (b) need to run Perl programs from TL that use -% additional modules we don't provide. The TL Perl does provide all the -% standard Perl modules. -% -%TEXLIVE_WINDOWS_TRY_EXTERNAL_PERL = 0 - - -% Part 3: Array and other sizes for TeX (and Metafont). -% -% If you want to change some of these sizes only for a certain TeX -% variant, the usual dot notation works, e.g., -% main_memory.hugetex = 20000000 -% -% If a change here appears to be ignored, try redumping the format file. - -% Memory. Must be less than 8,000,000 total. -% -% main_memory is relevant only to initex, extra_mem_* only to non-ini. -% Thus, have to redump the .fmt file after changing main_memory; to add -% to existing fmt files, increase extra_mem_*. (To get an idea of how -% much, try \tracingstats=2 in your TeX source file; -% web2c/tests/memtest.tex might also be interesting.) -% -% To increase space for boxes (as might be needed by, e.g., PiCTeX), -% increase extra_mem_bot. -% -% For some xy-pic samples, you may need as much as 700000 words of memory. -% For the vast majority of documents, 60000 or less will do. -% -main_memory = 3000000 % words of inimemory available; also applies to inimf&mp -extra_mem_top = 0 % extra high memory for chars, tokens, etc. -extra_mem_bot = 0 % extra low memory for boxes, glue, breakpoints, etc. - -% ConTeXt needs lots of memory. -extra_mem_top.context = 2000000 -extra_mem_bot.context = 4000000 - -% Words of font info for TeX (total size of all TFM files, approximately). -% Must be >= 20000 and <= 147483647 (without tex.ch changes). -font_mem_size = 3000000 - -% Total number of fonts. Must be >= 50 and <= 9000 (without tex.ch changes). -font_max = 9000 - -% Extra space for the hash table of control sequences. -hash_extra = 200000 - -% Max number of characters in all strings, including all error messages, -% help texts, font names, control sequences. These values apply to TeX. -pool_size = 3250000 -% Minimum pool space after TeX's own strings; must be at least -% 25000 less than pool_size, but doesn't need to be nearly that large. -string_vacancies = 90000 -% Maximum number of strings. -max_strings = 500000 -% min pool space left after loading .fmt -pool_free = 47500 - -% Buffer size. TeX uses the buffer to contain input lines, but macro -% expansion works by writing material into the buffer and reparsing the -% line. As a consequence, certain constructs require the buffer to be -% very large, even though most documents can be handled with a small value. -buf_size = 200000 - -% Hyphenation trie. The maximum possible is 4194303 (ssup_trie_size in -% the sources), but we don't need that much. The value here suffices -% for all known free hyphenation patterns to be loaded simultaneously -% (as TeX Live does). -% -trie_size = 1000000 - -hyph_size = 8191 % prime number of hyphenation exceptions, >610, <32767. - % http://primes.utm.edu/curios/page.php/8191.html -nest_size = 500 % simultaneous semantic levels (e.g., groups) -max_in_open = 15 % simultaneous input files and error insertions, - % also applies to MetaPost -param_size = 10000 % simultaneous macro parameters, also applies to MP -save_size = 50000 % for saving values outside current group -stack_size = 5000 % simultaneous input sources - -% These are Omega-specific. -ocp_buf_size = 500000 % character buffers for ocp filters. -ocp_stack_size = 10000 % stacks for ocp computations. -ocp_list_size = 1000 % control for multiple ocps. - -% These work best if they are the same as the I/O buffer size, but it -% doesn't matter much. Must be a multiple of 8. -dvi_buf_size = 16384 % TeX -gf_buf_size = 16384 % MF - -% It's probably inadvisable to change these. At any rate, we must have: -% 45 < error_line < 255; -% 30 < half_error_line < error_line - 15; -% 60 <= max_print_line; -% These apply to TeX, Metafont, and MetaPost. -error_line = 79 -half_error_line = 50 -max_print_line = 79 - -% Metafont only. -screen_width.mf = 1664 -screen_depth.mf = 1200 - -% BibTeX only (max_strings also determines hash_size and hash_prime). -ent_str_size = 250 -glob_str_size = 5000 -max_strings.bibtex = 35307 -max_strings.bibtex8 = 35307 -max_strings.bibtexu = 35307 -max_strings.pbibtex = 35307 - -% GFtype only. -line_length.gftype = 500 -max_rows.gftype = 8191 -max_cols.gftype = 8191 |