linux-libre-3.14-4: updating revision

* move from [libre-testing] to [libre]
* remove syscalls.h revert
* properly fix symbol CRC generation
* fix use of code32_start in the EFI boot stub
* re-add MTD_NAND to the configuration to support ricoh sd card readers (FS#25889 => https://bugs.archlinux.org/task/25889)

1 files changed, 0 insertions, 416 deletions

diff --git a/libre-testing/linux-libre/PKGBUILD b/libre-testing/linux-libre/PKGBUILD
deleted file mode 100644
index 88557d441..000000000
--- a/libre-testing/linux-libre/PKGBUILD
+++ /dev/null
@@ -1,416 +0,0 @@
-# $Id: PKGBUILD 209774 2014-04-03 22:57:31Z thomas $
-# Maintainer: Tobias Powalowski <tpowa@archlinux.org>
-# Maintainer: Thomas Baechler <thomas@archlinux.org>
-# Maintainer (Parabola): André Silva <emulatorman@parabola.nu>
-# Contributor (Parabola): Nicolás Reynolds <fauno@kiwwwi.com.ar>
-# Contributor (Parabola): Sorin-Mihai Vârgolici <smv@yobicore.org>
-# Contributor (Parabola): Michał Masłowski <mtjm@mtjm.eu>
-# Contributor (Parabola): Márcio Silva <coadde@parabola.nu>
-
-pkgbase=linux-libre         # Build stock -LIBRE kernel
-#pkgbase=linux-libre-custom # Build kernel with a different name
-_basekernel=3.14
-#_sublevel=7
-#pkgver=${_basekernel}.${_sublevel}
-pkgver=${_basekernel}
-pkgrel=3
-_lxopkgver=${_basekernel}.0 # nearly always the same as pkgver
-arch=('i686' 'x86_64' 'mips64el')
-url="http://linux-libre.fsfla.org/"
-license=('GPL2')
-makedepends=('xmlto' 'docbook-xsl' 'kmod' 'inetutils' 'bc')
-options=('!strip')
-source=("http://linux-libre.fsfla.org/pub/linux-libre/releases/${_basekernel}-gnu/linux-libre-${_basekernel}-gnu.tar.xz"
-        #"http://linux-libre.fsfla.org/pub/linux-libre/releases/${pkgver}-gnu/patch-${_basekernel}-gnu-${pkgver}-gnu.xz"
-        # the main kernel config files
-        'config.i686' 'config.x86_64'
-        # standard config files for mkinitcpio ramdisk
-        "${pkgbase}.preset"
-        'Kbuild'
-        'Kbuild.platforms'
-        'boot-logo.patch'
-        'change-default-console-loglevel.patch'
-        '0001-Bluetooth-allocate-static-minor-for-vhci.patch'
-        '0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch'
-        '0003-module-remove-MODULE_GENERIC_TABLE.patch'
-        '0004-Revert-syscalls.h-use-gcc-alias-instead-of-assembler.patch'
-        '0005-fs-Don-t-return-0-from-get_anon_bdev.patch'
-        '0006-Revert-Bluetooth-Enable-autosuspend-for-Intel-Blueto.patch'
-        "http://www.linux-libre.fsfla.org/pub/linux-libre/lemote/gnewsense/pool/debuginfo/linux-patches-${_lxopkgver}-gnu_0loongsonlibre_mipsel.tar.xz")
-sha256sums=('477555c709b9407fe37dbd70d3331ff9dde1f9d874aba2741f138d07ae6f281b'
-            'a5211049b129aa257a05a611fd800969518368329a0e198249e7873ca3c4ae33'
-            '5a54bad7c3d660f62162227351303341b944a8290f3cd8403481822b34d73f88'
-            'dfe01c93d83cdac9ca502715ceb6ac9502d327c939fec2e3052a5a58422dc176'
-            'c5451d5e1eafc4f8d28b1a2958ec3102c124433a414a86450fc32058e004156b'
-            '55bf07738a3286168a7929ae16dbca29defd14e77b9d24c487ae4c3d12bb9eb9'
-            '8303b426b1a6dce456b2350003558ae312d21cab0ae6c1f0d7b9d21395f4e177'
-            'faced4eb4c47c4eb1a9ee8a5bf8a7c4b49d6b4d78efbe426e410730e6267d182'
-            'ad22f6e1a2869730828ddaf93da8b8a748421b7afdd34e1213566985fe7b01dd'
-            '29e612a8dda2b2b8af116c16b546a0e1d159f249bfd9628d640cad0f61f0cc4f'
-            '555133445de48e781ced3a450bcdf9bfbe4d66b118bbd5b28fea789fa023dd66'
-            'dc1eca93dad93c9c015332d188f5a69508c2077536b8be653d2ff45f1b034941'
-            '1f572e748d96403218e846ec469474f557f04d2f5ff137dd2a31fffa193f760e'
-            'a413700adf3b45b7d3c18d2ffed390b9e5769cb361a9a0530f98bfff29fd0aef'
-            '16625d5e688626de0e508b70b42b11777bb30c7903671d970d8a5cfefa32e693')
-if [ "$CARCH" != "mips64el" ]; then
-    # don't use the Loongson-specific patches on non-mips64el arches.
-    unset source[${#source[@]}-1]
-    unset sha256sums[${#sha256sums[@]}-1]
-fi
-
-_kernelname=${pkgbase#linux-libre}
-_localversionname=-LIBRE
-
-prepare() {
-  cd "${srcdir}/linux-${_basekernel}"
-
-  if [ "${_basekernel}" != "${pkgver}" ]; then
-    patch -p1 -i "${srcdir}/patch-${_basekernel}-gnu-${pkgver}-gnu"
-  fi
-
-  # add freedo as boot logo
-  patch -p1 -i "${srcdir}/boot-logo.patch"
-
-  # add latest fixes from stable queue, if needed
-  # http://git.kernel.org/?p=linux/kernel/git/stable/stable-queue.git
-
-  # set DEFAULT_CONSOLE_LOGLEVEL to 4 (same value as the 'quiet' kernel param)
-  # remove this when a Kconfig knob is made available by upstream
-  # (relevant patch sent upstream: https://lkml.org/lkml/2011/7/26/227)
-  patch -p1 -i "${srcdir}/change-default-console-loglevel.patch"
-
-  # Fix vhci warning in kmod (to restore every kernel maintainer's sanity)
-  patch -p1 -i "${srcdir}/0001-Bluetooth-allocate-static-minor-for-vhci.patch"
-
-  # Fix atkbd aliases
-  patch -p1 -i "${srcdir}/0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch"
-  patch -p1 -i "${srcdir}/0003-module-remove-MODULE_GENERIC_TABLE.patch"
-
-  # Fix symbols: Revert http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=83460ec8dcac14142e7860a01fa59c267ac4657c
-  # For details, see https://lkml.org/lkml/2014/1/26/22
-  patch -p1 -i "${srcdir}/0004-Revert-syscalls.h-use-gcc-alias-instead-of-assembler.patch"
-
-  # Fix various bugs caused by rootfs having FSID 0
-  # See http://www.spinics.net/lists/kernel/msg1716924.html
-  patch -p1 -i "${srcdir}/0005-fs-Don-t-return-0-from-get_anon_bdev.patch"
-
-  # Disable usb autosuspend for intel btusb
-  # See http://www.spinics.net/lists/kernel/msg1716461.html
-  # Until a solution is found, make sure the driver leaves autosuspend alone
-  patch -p1 -i "${srcdir}/0006-Revert-Bluetooth-Enable-autosuspend-for-Intel-Blueto.patch"
-
-  if [ "$CARCH" == "mips64el" ]; then
-    sed -i "s|^EXTRAVERSION.*|EXTRAVERSION =-libre|" Makefile
-    sed -r "s|^( SUBLEVEL = ).*|\1$_sublevel|" \
-        < "${srcdir}/lxo-config.patch" > lxo-config.patch
-    msg2 "Adding loongson-community patches"
-    patch -p1 -i ${srcdir}/${_basekernel}*-*-loongson-community.patch
-    patch -p0 -i lxo-config.patch
-
-  # ensure N32, add localversion, remove uevent helper as per
-  # https://git.kernel.org/?p=linux/hotplug/udev.git;a=blob_plain;f=README
-  # and make USB storage support builtin (e.g. for booting from USB
-  # disks without slowly loading an initramfs)
-    sed -ri \
-        -e "s|CONFIG_MIPS32_N32=.*|CONFIG_MIPS32_N32=y|g" \
-        -e "s|CONFIG_UEVENT_HELPER_PATH=.*|CONFIG_UEVENT_HELPER_PATH=\"\"|g" \
-        -e "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_localversionname}\"|g" \
-        -e "s;(CONFIG_USB(_COMMON|_EHCI_HCD|_OHCI_HCD|_STORAGE.*|_UAS)?)=.*;\1=y;g" \
-        ./.config
-  else
-    cat "${srcdir}/config.${CARCH}" > ./.config # simpler
-  fi
-
-  if [ "${_kernelname}" != "" ]; then
-    sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_localversionname}\"|g" ./.config
-    sed -i "s|CONFIG_LOCALVERSION_AUTO=.*|CONFIG_LOCALVERSION_AUTO=n|" ./.config
-  fi
-
-  # set extraversion to pkgrel
-  sed -ri "s|^(EXTRAVERSION =).*|\1 -${pkgrel}|" Makefile
-
-  # don't run depmod on 'make install'. We'll do this ourselves in packaging
-  sed -i '2iexit 0' scripts/depmod.sh
-
-  # get kernel version
-  make prepare
-
-  # load configuration
-  # Configure the kernel. Replace the line below with one of your choice.
-  #make menuconfig # CLI menu for configuration
-  #make nconfig # new CLI menu for configuration
-  #make xconfig # X-based configuration
-  #make oldconfig # using old config from previous kernel version
-  # ... or manually edit .config
-
-  # rewrite configuration
-  yes "" | make config >/dev/null
-}
-
-build() {
-  cd "${srcdir}/linux-${_basekernel}"
-
-  if [ "$CARCH" == "mips64el" ]; then
-    # The build system passes it directly to linker, disable to avoid
-    # having unknown -Wl,... options.
-    export LDFLAGS=""
-    # bzImage is arch-specific and not supported on mips; vmlinux is
-    # useful for oprofile.
-    make ${MAKEFLAGS} LOCALVERSION= vmlinux vmlinuz modules
-  else
-    make ${MAKEFLAGS} LOCALVERSION= bzImage modules
-  fi
-}
-
-_package() {
-  pkgdesc="The ${pkgbase^} kernel and modules"
-  [ "${pkgbase}" = "linux-libre" ] && groups=('base')
-  depends=('coreutils' 'linux-libre-firmware' 'kmod')
-  optdepends=('crda: to set the correct wireless channels of your country')
-  provides=("kernel26${_kernelname}=${pkgver}" "linux${_kernelname}=${pkgver}")
-  conflicts=("kernel26${_kernelname}" "kernel26-libre${_kernelname}" "linux${_kernelname}")
-  replaces=("kernel26${_kernelname}" "kernel26-libre${_kernelname}" "linux${_kernelname}")
-  backup=("etc/mkinitcpio.d/${pkgbase}.preset")
-  install=${pkgbase}.install
-  if [ "$CARCH" != "mips64el" ]; then
-     provides+=("linux-libre${_kernelname}-kmod-alx")
-     conflicts+=("linux-libre${_kernelname}-kmod-alx")
-     replaces+=("linux-libre${_kernelname}-kmod-alx")
-  fi
-  if [ "$CARCH" = "mips64el" ]; then
-      optdepends+=('mkinitcpio: to make the initramfs (needs reinstall of this package)')
-      conflicts+=('mkinitcpio<0.7')
-  else
-      depends+=('mkinitcpio>=0.7')
-  fi
-
-  cd "${srcdir}/linux-${_basekernel}"
-
-  KARCH=x86
-  [ $CARCH = "mips64el" ] && KARCH=mips
-
-  # get kernel version
-  _kernver="$(make LOCALVERSION= kernelrelease)"
-  _basekernel=${_kernver%%-*}
-  _basekernel=${_basekernel%.*}
-
-  mkdir -p "${pkgdir}"/{lib/modules,lib/firmware,boot}
-  make LOCALVERSION= INSTALL_MOD_PATH="${pkgdir}" modules_install
-
-  if [ "$CARCH" == "mips64el" ]; then
-    cp vmlinuz "${pkgdir}/boot/vmlinuz-${pkgbase}"
-    cp vmlinux "${pkgdir}/boot/vmlinux-${pkgbase}"
-  else
-    cp arch/${KARCH}/boot/bzImage "${pkgdir}/boot/vmlinuz-${pkgbase}"
-  fi
-
-  # set correct depmod command for install
-  cp -f "${startdir}/${install}" "${startdir}/${install}.pkg"
-  true && install=${install}.pkg
-  sed \
-    -e  "s/KERNEL_NAME=.*/KERNEL_NAME=${_kernelname}/" \
-    -e  "s/KERNEL_VERSION=.*/KERNEL_VERSION=${_kernver}/" \
-    -i "${startdir}/${install}"
-
-  # install mkinitcpio preset file for kernel
-  install -D -m644 "${srcdir}/${pkgbase}.preset" "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset"
-  sed \
-    -e "1s|'linux*.*'|'${pkgbase}'|" \
-    -e "s|ALL_kver=.*|ALL_kver=\"/boot/vmlinuz-${pkgbase}\"|" \
-    -e "s|default_image=.*|default_image=\"/boot/initramfs-${pkgbase}.img\"|" \
-    -e "s|fallback_image=.*|fallback_image=\"/boot/initramfs-${pkgbase}-fallback.img\"|" \
-    -i "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset"
-
-  # mkinitcpio 0.7 relies on bzImage to find the kernel version
-  if [ "$CARCH" == "mips64el" ]; then
-    sed -e "s|ALL_kver=.*|ALL_kver=\"${_kernver}\"|" \
-        -i "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset"
-  fi
-
-  # remove build and source links
-  rm -f "${pkgdir}"/lib/modules/${_kernver}/{source,build}
-  # remove the firmware
-  rm -rf "${pkgdir}/lib/firmware"
-  # gzip -9 all modules to save 100MB of space
-  find "${pkgdir}" -name '*.ko' -exec gzip -9 {} \;
-  # make room for external modules
-  ln -s "../extramodules-${_basekernel}${_localversionname:--LIBRE}" "${pkgdir}/lib/modules/${_kernver}/extramodules"
-  # add real version for building modules and running depmod from post_install/upgrade
-  mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_localversionname:--LIBRE}"
-  echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}${_localversionname:--LIBRE}/version"
-
-  # Now we call depmod...
-  depmod -b "${pkgdir}" -F System.map "${_kernver}"
-
-  # move module tree /lib -> /usr/lib
-  mkdir -p "${pkgdir}/usr"
-  mv "${pkgdir}/lib" "${pkgdir}/usr/"
-
-  # add vmlinux
-  install -D -m644 vmlinux "${pkgdir}/usr/lib/modules/${_kernver}/build/vmlinux" 
-}
-
-_package-headers() {
-  pkgdesc="Header files and scripts for building modules for ${pkgbase^} kernel"
-  provides=("kernel26${_kernelname}-headers=${pkgver}" "linux${_kernelname}-headers=${pkgver}")
-  conflicts=("kernel26${_kernelname}-headers" "kernel26-libre${_kernelname}-headers" "linux${_kernelname}-headers")
-  replaces=("kernel26${_kernelname}-headers" "kernel26-libre${_kernelname}-headers" "linux${_kernelname}-headers")
-
-  KARCH=x86
-  [ $CARCH = "mips64el" ] && KARCH=mips
-
-  # in case of repackaging this is empty
-  if [ -z "${_kernver}" ]; then
-    cd "${srcdir}/linux-${_basekernel}"
-    _kernver="$(make LOCALVERSION= kernelrelease)"
-  fi
-
-  install -dm755 "${pkgdir}/usr/lib/modules/${_kernver}"
-
-  cd "${srcdir}/linux-${_basekernel}"
-  install -D -m644 Makefile \
-    "${pkgdir}/usr/lib/modules/${_kernver}/build/Makefile"
-  install -D -m644 kernel/Makefile \
-    "${pkgdir}/usr/lib/modules/${_kernver}/build/kernel/Makefile"
-  install -D -m644 .config \
-    "${pkgdir}/usr/lib/modules/${_kernver}/build/.config"
-
-  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include"
-
-  for i in acpi asm-generic config crypto drm generated keys linux math-emu \
-    media net pcmcia scsi sound trace uapi video xen; do
-    cp -a include/${i} "${pkgdir}/usr/lib/modules/${_kernver}/build/include/"
-  done
-
-  # copy arch includes for external modules
-  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}"
-  cp -a arch/${KARCH}/include "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/"
-
-  # copy files necessary for later builds
-  cp Module.symvers "${pkgdir}/usr/lib/modules/${_kernver}/build"
-  cp -a scripts "${pkgdir}/usr/lib/modules/${_kernver}/build"
-
-  if [ "$CARCH" = "mips64el" ]; then
-    cp arch/${KARCH}/Kbuild "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/"
-    cp -a arch/${KARCH}/loongson "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/"
-    cp ${srcdir}/Kbuild.platforms "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/"
-  fi
-
-  # fix permissions on scripts dir
-  chmod og-w -R "${pkgdir}/usr/lib/modules/${_kernver}/build/scripts"
-  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/.tmp_versions"
-
-  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/kernel"
-
-  cp arch/${KARCH}/Makefile "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/"
-
-  if [ "${CARCH}" = "i686" ]; then
-    cp arch/${KARCH}/Makefile_32.cpu "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/"
-  fi
-
-  cp arch/${KARCH}/kernel/asm-offsets.s "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/kernel/"
-
-  # add docbook makefile
-  install -D -m644 Documentation/DocBook/Makefile \
-    "${pkgdir}/usr/lib/modules/${_kernver}/build/Documentation/DocBook/Makefile"
-
-  # add dm headers
-  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/md"
-  cp drivers/md/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/md"
-
-  # add inotify.h
-  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include/linux"
-  cp include/linux/inotify.h "${pkgdir}/usr/lib/modules/${_kernver}/build/include/linux/"
-
-  # add wireless headers
-  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/net/mac80211/"
-  cp net/mac80211/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/net/mac80211/"
-
-  # add dvb headers for external modules
-  # in reference to:
-  # http://bugs.archlinux.org/task/9912
-  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-core"
-  cp drivers/media/dvb-core/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-core/"
-  # and...
-  # http://bugs.archlinux.org/task/11194
-  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include/config/dvb/"
-  cp include/config/dvb/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/include/config/dvb/"
-
-  # add dvb headers for http://mcentral.de/hg/~mrec/em28xx-new
-  # in reference to:
-  # http://bugs.archlinux.org/task/13146
-  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
-  cp drivers/media/dvb-frontends/lgdt330x.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
-  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/i2c/"
-  cp drivers/media/i2c/msp3400-driver.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/i2c/"
-
-  # add dvb headers
-  # in reference to:
-  # http://bugs.archlinux.org/task/20402
-  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/usb/dvb-usb"
-  cp drivers/media/usb/dvb-usb/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/usb/dvb-usb/"
-  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends"
-  cp drivers/media/dvb-frontends/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
-  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/tuners"
-  cp drivers/media/tuners/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/tuners/"
-
-  # add xfs and shmem for aufs building
-  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/fs/xfs"
-  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/mm"
-  cp fs/xfs/xfs_sb.h "${pkgdir}/usr/lib/modules/${_kernver}/build/fs/xfs/xfs_sb.h"
-
-  # copy in Kconfig files
-  for i in $(find . -name "Kconfig*"); do
-    mkdir -p "${pkgdir}"/usr/lib/modules/${_kernver}/build/`echo ${i} | sed 's|/Kconfig.*||'`
-    cp ${i} "${pkgdir}/usr/lib/modules/${_kernver}/build/${i}"
-  done
-
-  chown -R root.root "${pkgdir}/usr/lib/modules/${_kernver}/build"
-  find "${pkgdir}/usr/lib/modules/${_kernver}/build" -type d -exec chmod 755 {} \;
-
-  # strip scripts directory
-  find "${pkgdir}/usr/lib/modules/${_kernver}/build/scripts" -type f -perm -u+w 2>/dev/null | while read binary ; do
-    case "$(file -bi "${binary}")" in
-      *application/x-sharedlib*) # Libraries (.so)
-        /usr/bin/strip ${STRIP_SHARED} "${binary}";;
-      *application/x-archive*) # Libraries (.a)
-        /usr/bin/strip ${STRIP_STATIC} "${binary}";;
-      *application/x-executable*) # Binaries
-        /usr/bin/strip ${STRIP_BINARIES} "${binary}";;
-    esac
-  done
-
-  # remove unneeded architectures
-  rm -rf "${pkgdir}"/usr/lib/modules/${_kernver}/build/arch/{alpha,arc,arm,arm26,arm64,avr32,blackfin,c6x,cris,frv,h8300,hexagon,ia64,m32r,m68k,m68knommu,metag,microblaze,mn10300,openrisc,parisc,powerpc,ppc,s390,score,sh,sh64,sparc,sparc64,tile,unicore32,um,v850,xtensa}
-  if [ "$CARCH" = "mips64el" ]; then
-    rm -rf ${pkgdir}/usr/lib/modules/${_kernver}/build/arch/x86
-  else
-    rm -rf ${pkgdir}/usr/lib/modules/${_kernver}/build/arch/mips
-  fi
-}
-
-_package-docs() {
-  pkgdesc="Kernel hackers manual - HTML documentation that comes with the ${pkgbase^} kernel"
-  provides=("kernel26${_kernelname}-docs=${pkgver}" "linux${_kernelname}-docs=${pkgver}")
-  conflicts=("kernel26${_kernelname}-docs" "kernel26-libre${_kernelname}-docs" "linux${_kernelname}-docs")
-  replaces=("kernel26${_kernelname}-docs" "kernel26-libre${_kernelname}-docs" "linux${_kernelname}-docs")
-
-  cd "${srcdir}/linux-${_basekernel}"
-
-  mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build"
-  cp -al Documentation "${pkgdir}/usr/lib/modules/${_kernver}/build"
-  find "${pkgdir}" -type f -exec chmod 444 {} \;
-  find "${pkgdir}" -type d -exec chmod 755 {} \;
-
-  # remove a file already in linux package
-  rm -f "${pkgdir}/usr/lib/modules/${_kernver}/build/Documentation/DocBook/Makefile"
-}
-
-pkgname=("${pkgbase}" "${pkgbase}-headers" "${pkgbase}-docs")
-for _p in ${pkgname[@]}; do
-  eval "package_${_p}() {
-    _package${_p#${pkgbase}}
-  }"
-done
-
-# vim:set ts=8 sts=2 sw=2 et: