uboot-beagleboard-linux-libre: add new package to [libre]

3 files changed, 352 insertions, 0 deletions

diff --git a/libre/uboot-beagleboard-linux-libre/0001-parabola-arm-modifications.patch b/libre/uboot-beagleboard-linux-libre/0001-parabola-arm-modifications.patch
new file mode 100644
index 000000000..dbca32bb5
--- /dev/null
+++ b/libre/uboot-beagleboard-linux-libre/0001-parabola-arm-modifications.patch
@@ -0,0 +1,308 @@
+diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
+index 7b37fbe..ff986ff 100644
+--- a/board/ti/beagle/beagle.c
++++ b/board/ti/beagle/beagle.c
+@@ -56,6 +56,7 @@
+ #define BBTOYS_WIFI			0x01000B00
+ #define BBTOYS_VGA			0x02000B00
+ #define BBTOYS_LCD			0x03000B00
++#define BBTOYS_ULCD			0x04000B00
+ #define BCT_BRETTL3			0x01000F00
+ #define BCT_BRETTL4			0x02000F00
+ #define LSR_COM6L_ADPT			0x01001300
+@@ -211,25 +212,25 @@ void get_board_mem_timings(struct board_sdrc_timings *timings)
+  *		bus 1 for the availability of an AT24C01B serial EEPROM.
+  *		returns the device_vendor field from the EEPROM
+  */
+-static unsigned int get_expansion_id(void)
++static unsigned int get_expansion_id(int eeprom_address)
+ {
+ 	i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS);
+ 
+ 	/* return BEAGLE_NO_EEPROM if eeprom doesn't respond */
+-	if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1) {
++	if (i2c_probe(eeprom_address) == 1) {
+ 		i2c_set_bus_num(TWL4030_I2C_BUS);
+ 		return BEAGLE_NO_EEPROM;
+ 	}
+ 
+ 	/* read configuration data */
+-	i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config,
++	i2c_read(eeprom_address, 0, 1, (u8 *)&expansion_config,
+ 		 sizeof(expansion_config));
+ 
+ 	/* retry reading configuration data with 16bit addressing */
+ 	if ((expansion_config.device_vendor == 0xFFFFFF00) ||
+ 	    (expansion_config.device_vendor == 0xFFFFFFFF)) {
+ 		printf("EEPROM is blank or 8bit addressing failed: retrying with 16bit:\n");
+-		i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 2, (u8 *)&expansion_config,
++		i2c_read(eeprom_address, 0, 2, (u8 *)&expansion_config,
+ 			 sizeof(expansion_config));
+ 	}
+ 
+@@ -341,15 +342,18 @@ int misc_init_r(void)
+ 	case REVISION_AXBX:
+ 		printf("Beagle Rev Ax/Bx\n");
+ 		setenv("beaglerev", "AxBx");
++		setenv("musb", "musb_hdrc.fifo_mode=5");
+ 		break;
+ 	case REVISION_CX:
+ 		printf("Beagle Rev C1/C2/C3\n");
+ 		setenv("beaglerev", "Cx");
++		setenv("musb", "musb_hdrc.fifo_mode=5");
+ 		MUX_BEAGLE_C();
+ 		break;
+ 	case REVISION_C4:
+ 		printf("Beagle Rev C4\n");
+ 		setenv("beaglerev", "C4");
++		setenv("musb", "musb_hdrc.fifo_mode=5");
+ 		MUX_BEAGLE_C();
+ 		/* Set VAUX2 to 1.8V for EHCI PHY */
+ 		twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
+@@ -390,7 +394,7 @@ int misc_init_r(void)
+ 		generate_fake_mac = true;
+ 	}
+ 
+-	switch (get_expansion_id()) {
++	switch (get_expansion_id(EXPANSION_EEPROM_I2C_ADDRESS)) {
+ 	case TINCANTOOLS_ZIPPY:
+ 		printf("Recognized Tincantools Zippy board (rev %d %s)\n",
+ 			expansion_config.revision,
+@@ -473,6 +477,30 @@ int misc_init_r(void)
+ 	if (expansion_config.content == 1)
+ 		setenv(expansion_config.env_var, expansion_config.env_setting);
+ 
++	/* Scan 0x51 as well for loop-thru boards */
++	switch (get_expansion_id(EXPANSION_EEPROM_I2C_ADDRESS + 1)) {
++	case BBTOYS_ULCD:
++		printf("Recognized BeagleBoardToys uLCD-lite board\n");
++		setenv("buddy2", "bbtoys-ulcd");
++		setenv("defaultdisplay", "dvi");
++		setenv("dvimode", "800x480MR-16@60");
++		setenv("lcd1", "i2c mw 40 00 00; i2c mw 40 04 80; i2c mw 40 0d 05");
++		setenv("lcdcmd", "i2c dev 1 ; run lcd1; i2c dev 0");
++		setenv("kmsmode", "video=DVI-D-1:800x480");
++		break;
++	case BEAGLE_NO_EEPROM:
++		printf("No EEPROM on expansion board\n");
++		setenv("buddy2", "none");
++		break;
++	default:
++		printf("Unrecognized expansion board: %x\n",
++			expansion_config.device_vendor);
++		setenv("buddy2", "unknown");
++	}
++
++	if (expansion_config.content == 1)
++		setenv(expansion_config.env_var, expansion_config.env_setting);
++
+ 	twl4030_power_init();
+ 	switch (get_board_revision()) {
+ 	case REVISION_XM_AB:
+diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
+index f25a940..9f15cf1 100644
+--- a/include/configs/omap3_beagle.h
++++ b/include/configs/omap3_beagle.h
+@@ -90,6 +90,12 @@
+ #define CONFIG_USB_ETHER_MCS7830
+ #define CONFIG_USB_ETHER_SMSC95XX
+ 
++/* Parabola GNU/Linux-libre extras */
++#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre"
++#define CONFIG_SUPPORT_RAW_INITRD
++#define CONFIG_CMD_PART
++#define CONFIG_PARTITION_UUIDS
++
+ /* GPIO banks */
+ #define CONFIG_OMAP3_GPIO_5		/* GPIO128..159 is in GPIO bank 5 */
+ #define CONFIG_OMAP3_GPIO_6		/* GPIO160..191 is in GPIO bank 6 */
+@@ -129,50 +135,62 @@
+ 							/* devices */
+ 
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+-	"loadaddr=0x80200000\0" \
+-	"rdaddr=0x81000000\0" \
++	"loadaddr=0x82000000\0" \
++	"rdaddr=0x88080000\0" \
+ 	"fdt_high=0xffffffff\0" \
+-	"fdtaddr=0x80f80000\0" \
+-	"usbtty=cdc_acm\0" \
+-	"bootfile=uImage\0" \
+-	"ramdisk=ramdisk.gz\0" \
+-	"bootdir=/boot\0" \
+-	"bootpart=0:2\0" \
++	"fdtaddr=0x88000000\0" \
+ 	"console=ttyO2,115200n8\0" \
+-	"mpurate=auto\0" \
+-	"buddy=none\0" \
+-	"optargs=\0" \
+-	"camera=none\0" \
+-	"vram=12M\0" \
+-	"dvimode=640x480MR-16@60\0" \
+-	"defaultdisplay=dvi\0" \
++	"fdtfile=undefined\0" \
++	"bootpart=0:1\0" \
++	"bootdir=/\0" \
++	"fdtdir=/dtbs/linux-libre\0" \
++	"bootfile=vmlinuz-linux-libre\0" \
++	"rdfile=initramfs-linux-libre.img\0" \
+ 	"mmcdev=0\0" \
+-	"mmcroot=/dev/mmcblk0p2 rw\0" \
+-	"mmcrootfstype=ext3 rootwait\0" \
+-	"nandroot=ubi0:rootfs ubi.mtd=4\0" \
+-	"nandrootfstype=ubifs\0" \
+-	"ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=0x81000000,64M\0" \
+-	"ramrootfstype=ext2\0" \
++	"optargs=\0" \
+ 	"mmcargs=setenv bootargs console=${console} " \
+ 		"${optargs} " \
+-		"mpurate=${mpurate} " \
+-		"buddy=${buddy} "\
+-		"camera=${camera} "\
+-		"vram=${vram} " \
+-		"omapfb.mode=dvi:${dvimode} " \
+-		"omapdss.def_disp=${defaultdisplay} " \
+-		"root=${mmcroot} " \
+-		"rootfstype=${mmcrootfstype}\0" \
+-	"nandargs=setenv bootargs console=${console} " \
+-		"${optargs} " \
+-		"mpurate=${mpurate} " \
+-		"buddy=${buddy} "\
+-		"camera=${camera} "\
+-		"vram=${vram} " \
+-		"omapfb.mode=dvi:${dvimode} " \
+-		"omapdss.def_disp=${defaultdisplay} " \
+-		"root=${nandroot} " \
+-		"rootfstype=${nandrootfstype}\0" \
++		"root=${root} " \
++		"${musb} " \
++		"${cmdline}\0" \
++	"loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
++	"loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \
++	"loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \
++	"mmcboot=usb start;" \
++		"for devtype in mmc usb; do " \
++			"setenv devnum 0;" \
++			"while ${devtype} dev ${devnum}; do " \
++				"echo ${devtype} found on device ${devnum};" \
++				"setenv bootpart ${devnum}:1;" \
++				"if test ${devtype} = mmc; then part uuid mmc ${devnum}:2 uuid; else part uuid ${devtype} ${devnum}:1 uuid; fi;" \
++				"part uuid ${devtype} ${rootpart} uuid;" \
++				"setenv root PARTUUID=${uuid} rw rootwait;" \
++				"echo Checking for: ${bootdir}/uEnv.txt ...;" \
++				"if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \
++					"load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \
++					"env import -t ${loadaddr} ${filesize};" \
++					"echo Loaded environment from ${bootdir}/uEnv.txt;" \
++					"echo Checking if uenvcmd is set ...;" \
++					"if test -n ${uenvcmd}; then " \
++						"echo Running uenvcmd ...;" \
++						"run uenvcmd;" \
++					"fi;" \
++				"fi;" \
++				"if run loadimage; then " \
++					"run mmcargs;" \
++					"if run loadfdt; then " \
++						"if run loadrd; then " \
++							"bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \
++						"else " \
++							"bootz ${loadaddr} - ${fdtaddr};" \
++						"fi;" \
++					"fi;" \
++				"else " \
++					"echo No kernel found;" \
++				"fi;" \
++				"setexpr devnum ${devnum} + 1;" \
++			"done;" \
++		"done;\0" \
+ 	"findfdt=" \
+ 		"if test $beaglerev = AxBx; then " \
+ 			"setenv fdtfile omap3-beagle.dtb; fi; " \
+@@ -185,81 +203,11 @@
+ 		"if test $beaglerev = xMC; then " \
+ 			"setenv fdtfile omap3-beagle-xm.dtb; fi; " \
+ 		"if test $fdtfile = undefined; then " \
+-			"echo WARNING: Could not determine device tree to use; fi; \0" \
+-	"validatefdt=" \
+-		"if test $beaglerev = xMAB; then " \
+-			"if test ! -e mmc ${bootpart} ${bootdir}/${fdtfile}; then " \
+-				"setenv fdtfile omap3-beagle-xm.dtb; " \
+-			"fi; " \
+-		"fi; \0" \
+-	"bootenv=uEnv.txt\0" \
+-	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+-	"importbootenv=echo Importing environment from mmc ...; " \
+-		"env import -t -r $loadaddr $filesize\0" \
+-	"ramargs=setenv bootargs console=${console} " \
+-		"${optargs} " \
+-		"mpurate=${mpurate} " \
+-		"buddy=${buddy} "\
+-		"vram=${vram} " \
+-		"omapfb.mode=dvi:${dvimode} " \
+-		"omapdss.def_disp=${defaultdisplay} " \
+-		"root=${ramroot} " \
+-		"rootfstype=${ramrootfstype}\0" \
+-	"loadramdisk=load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \
+-	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+-	"loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+-	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
+-		"source ${loadaddr}\0" \
+-	"loadfdt=run validatefdt; load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+-	"mmcboot=echo Booting from mmc ...; " \
+-		"run mmcargs; " \
+-		"bootm ${loadaddr}\0" \
+-	"mmcbootz=echo Booting with DT from mmc${mmcdev} ...; " \
+-		"run mmcargs; " \
+-		"bootz ${loadaddr} - ${fdtaddr}\0" \
+-	"nandboot=echo Booting from nand ...; " \
+-		"run nandargs; " \
+-		"nand read ${loadaddr} 280000 400000; " \
+-		"bootm ${loadaddr}\0" \
+-	"ramboot=echo Booting from ramdisk ...; " \
+-		"run ramargs; " \
+-		"bootm ${loadaddr}\0" \
+-	"userbutton=if gpio input 173; then run userbutton_xm; " \
+-		"else run userbutton_nonxm; fi;\0" \
+-	"userbutton_xm=gpio input 4;\0" \
+-	"userbutton_nonxm=gpio input 7;\0"
+-/* "run userbutton" will return 1 (false) if pressed and 0 (true) if not */
++			"echo WARNING: Could not determine device tree to use; fi; \0"
++
+ #define CONFIG_BOOTCOMMAND \
+ 	"run findfdt; " \
+-	"mmc dev ${mmcdev}; if mmc rescan; then " \
+-		"if run userbutton; then " \
+-			"setenv bootenv uEnv.txt;" \
+-		"else " \
+-			"setenv bootenv user.txt;" \
+-		"fi;" \
+-		"echo SD/MMC found on device ${mmcdev};" \
+-		"if run loadbootenv; then " \
+-			"echo Loaded environment from ${bootenv};" \
+-			"run importbootenv;" \
+-		"fi;" \
+-		"if test -n $uenvcmd; then " \
+-			"echo Running uenvcmd ...;" \
+-			"run uenvcmd;" \
+-		"fi;" \
+-		"if run loadbootscript; then " \
+-			"run bootscript; " \
+-		"else " \
+-			"if run loadimage; then " \
+-				"run mmcboot;" \
+-			"fi;" \
+-		"fi; " \
+-	"fi;" \
+-	"run nandboot;" \
+-	"setenv bootfile zImage;" \
+-	"if run loadimage; then " \
+-		"run loadfdt;" \
+-		"run mmcbootz; " \
+-	"fi; " \
++	"run mmcboot"
+ 
+ /*
+  * OMAP3 has 12 GP timers, they can be driven by the system clock
+-- 
+2.4.2
+
diff --git a/libre/uboot-beagleboard-linux-libre/PKGBUILD b/libre/uboot-beagleboard-linux-libre/PKGBUILD
new file mode 100644
index 000000000..d7cbf8bbe
--- /dev/null
+++ b/libre/uboot-beagleboard-linux-libre/PKGBUILD
@@ -0,0 +1,44 @@
+# U-Boot: BeagleBoard and BeagleBoard-xM
+# Maintainer (Arch): Kevin Mihelich <kevin@archlinuxarm.org>
+# Maintainer: André Silva <emulatorman@parabola.nu>
+
+buildarch=4
+
+_pkgname=linux-libre
+pkgname=uboot-beagleboard-${_pkgname}
+pkgver=2015.04
+pkgrel=1
+pkgdesc="U-Boot for BeagleBoard and BeagleBoard-xM (built for the linux-libre kernel package)"
+arch=('armv7h')
+url="http://git.denx.de/u-boot.git/"
+license=('GPL')
+depends=('linux-libre')
+makedepends=('bc')
+replaces=('uboot-beagleboard')
+source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2"
+        '0001-parabola-arm-modifications.patch'
+        'uEnv.txt')
+md5sums=('570bdc2c47270c2a98ca60ff6c5c74cd'
+         '98d94d7e1ac1302da57c89dc3b5b9f5b'
+         'd41d8cd98f00b204e9800998ecf8427e')
+
+prepare() {
+  cd u-boot-${pkgver}
+  patch -Np1 -i ../0001-parabola-arm-modifications.patch
+}
+
+build() {
+  cd u-boot-${pkgver}
+
+  unset LDFLAGS CFLAGS CXXFLAGS
+
+  make distclean 
+  make omap3_beagle_config
+  make
+}
+
+package() {
+  cd u-boot-${pkgver}
+  mkdir -p "${pkgdir}/boot/${pkgname}"
+  cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}/boot/${pkgname}"
+}
diff --git a/libre/uboot-beagleboard-linux-libre/uEnv.txt b/libre/uboot-beagleboard-linux-libre/uEnv.txt
new file mode 100644
index 000000000..e69de29bb
--- /dev/null
+++ b/libre/uboot-beagleboard-linux-libre/uEnv.txt